32-bit Register / Numbers Viewer

1,00

  • Enter (up to 32-bit) binary numbers, decimals or hexadecimal numbers.
  • See number / register contents graphically with the red (0) / green (1) bit view.
  • Converts between binary-decimal-hexadecimal…. enter any type, to be converted to binary digits / bit view.
  • Use “bit ruler” to check binary values of any part of the bit sequence – from bit 0 to bit 7 for example.
  • Can be used for 8-bit, 16-bit, 32-bit micro controller (MCU) registers set-up, for programmers.
  • Save pages as text files for later retrieval (along with register name) – to re-open in same program.
  • Output report from page as text file (along with register name) – to view number / “bit ruler” value / each bit setting (b0, b1, ….. , b31) as a normal text file.

 

  • Compatible with all versions of Windows (1998+)

Description

32-bit Register (or number) Viewer

  • Enter (up to 32-bit) binary numbers, decimals or hexadecimal numbers.
  • Accepts 1-bit, 2-bit, 3-bit, 4-bit, 5-bit, 6-bit, 7-bit, 8-bit, 9-bit, 10-bit, 11-bit, 12-bit, 13-bit, 14-bit, 15-bit, 16-bit, 17-bit, 18-bit, 19-bit, 20-bit, 21-bit, 22-bit, 23-bit, 24-bit, 25-bit, 26-bit, 27-bit, 28-bit, 29-bit, 30-bit, 31-bit and 32-bit values in binary, decimal or hexadecimal form.
  • See number / register contents graphically with the red (0) / green (1) bit view.
  • Converts between binary-decimal-hexadecimal…. enter any type, to be converted to binary digits / bit view.
  • Use “bit ruler” to check binary values of any part of the bit sequence – from bit 5 to bit 7 for example (3-bit partial value shown).
  • Can be used for 8-bit, 16-bit, 32-bit micro controller (MCU) registers set-up, for programmers.
  • Can be used for 10-bit ADCs, 24-bit audio etc….
  • Save pages as text files for later retrieval (along with register name) – to re-open in same program.
  • Output report from page as text file (along with register name) – to view number / “bit ruler” value / each bit setting (b0, b1, ….. , b31) as a normal text file.

 

  • Compatible with all versions of Windows (1998+)

 

Application Preview

 

Start-up of program

 

6-bit value entered

 

32-bit value entered

 

32-bit value entered as decimal

 

32-bit value entered as decimal – “ENTER” pressed

 

32-bit value entered as hexadecimal

 

32-bit value entered as decimal – “ENTER” pressed

 

32-bit value entered – BLUE “Bit Ruler” used to work-out binary values of any bit sequence

 

Set all bits as 0

 

Set all bits as 1

 

Set “Walking 1’s” values (0b10101010….)

 

Shift Walking 1’s pattern LEFT or RIGHT (adds 0’s)

 

Save page (saved as text file)

 

Re-load page

 

Output Report (text file)

 

View report with any Text Editor

 

View Report (with “Bit Ruler” values saved)

Reviews

There are no reviews yet.

Be the first to review “32-bit Register / Numbers Viewer”

Your email address will not be published. Required fields are marked *



Exclusive products

Special category of products